ABLIC offers ICs ideal for Headlamps and Rear Lamps, which continue to evolve. ABLIC offers a comprehensive range of products: such as LDOs with built-in watchdog timers for monitoring MCUs, battery monitoring ICs that monitor 12V auxiliary batteries for abnormal voltages, ZCL™ Hall effect ICs which operate ideally in BLDC motors for auto-leveling and cooling fans.

LDO Regulator:

S-19212——Powers the sensor. The output voltage can be set between 2.5 to 16V.

Watchdog Timer:

S-1951x——With reset and LDO regulator functions. Current consumption of 3.0μA.

Voltage detector:

S-19117/9——With supply voltage divided output. Built-in SENSE Pin reverse connection protection circuit. Current consumption of 0.75μA

Hall effect IC:

S-57TZ S——ZCL™ Hall effect ICs are perfect for BLDC motor control, creating stable BLDC motor control over a wide temperature range.

Hall effect IC:

S-57RB S——Bipolar Hall effect Latch ICs with a thin and small package. The thin package contributes to thinner BLDC motors.

EEPROM:

S-93CxxC H (3-wire)、S-24CxxC H (2-wire)、S-25CxxxA H (SPI)——Serial EEPROM. Built-in data protection functions. 105°C max. operation.

ABLIC offers ICs best for Power Closure Systems. ABLIC offers a comprehensive range of products: such as high-accuracy operational amplifiers that detect pinching prevention, LDOs with built-in watchdog timers to monitor MCUs, LDOs and Voltage Trackers developed for sensor power supplies, and ZCL™ Hall effect ICs which operate optimally in BLDC motors.

Watchdog Timer:

S-1951x——With reset and LDO regulator functions. Current consumption of 3.0μA.

Voltage Tracker:

S-19720——The industry’s lowest offset voltage of ±5mV. Available in an ultra compact (2.46 x 1.96mm) package. Current consumption during power-off of 4μA.

LDO Regulator:

S-19212——Powers the sensor. The output voltage can be set between 2.5 to 16V.

Hall effect IC:

S-57TZ S——ZCL™ Hall effect ICs are perfect for BLDC motor control, creating stable BLDC motor control over a wide temperature range.

Operational amplifier:

S-19630A——High-accuracy current detection. 36V operation, Rail-to-Rail input/output, low offset voltage of 50μV.

EEPROM:

S-93CxxC H (3-wire)、S-24CxxC H (2-wire)、S-25CxxxA H (SPI)——Serial EEPROM. Built-in data protection functions. 105°C max. operation.

ABLIC propose is to“downsize the power supply IC, an indispensable part in an automotive camera”, it′s product lineup supports the downsizing and higher performance of automotive camera modules. For example, we provide DC-DC converters in the industry′s smallest class of ultra compact packages or LDO regulator reset ICs with a minimum number of parts.

1.Camera module

DC-DC converter:

S-19902/3——36V input, available in the industry′s smallest package.

Contributes to fewer and more compact external parts.

S-19932/3 (2.2MHz)——18V input, available in an ultra-compact (2.46 x 1.96mm) package.

S-19944/5——18V input, low noise. Contributes to fewer and more compact external parts.

LDO Regulator:

S-19255——5.5V input, 125℃ operation, 300mA output current. Available in an ultra compact (1.0 x 1.0mm) package. Noise countermeasures include a high ripple rejection rate. 0.1μF input capacitors can be used.

S-19251——5.5V input, 105℃ operation, 150mA output current. Available in an ultra compact (0.8 x 0.8mm) package. Noise countermeasures include a high ripple rejection rate.

S-19252——5.5V input, 105℃ operation, 150mA output current. Available in an ultra compact (1.0 x 1.0mm) package. Soft start functionality is integrated.

Voltage detector:

S-19100 H (105℃ operation)——Available in an ultra compact package (1.2 x 1.6mm) ideally suited to high density mounting. Ultra-low current consumption of 270nA.

S-19100 (125℃ operation)——Available in an ultra compact package (2.0 x 2.1mm) ideally suited to high density mounting. Ultra-low current consumption of 270nA.

2.Camera module——Camera ECU

DC-DC converter：

S-19914/5——36V input, low noise, available in the industry′s smallest package. Contributes to fewer and more compact external parts.

Watchdog Timer:

S-19400/1 (125℃operation)——Industryʼs top class super-low current consumption 3.8μA. With reset function. Available in 2.0 x 3.0mm package.

3.Camera ECU

Automotive Connection Diagnosis ICs:

S-19682/3——Available in the industry′s smallest package. Connection diagnosis delivers "Small, Simple and High Accuracy".

S-19700/1——An LDO regulator IC capable of detecting a variety of connection faults.

Voltage detector:

S-191L/N——The industry′s first "Supply voltage divided output" to help the microcontrollers in monitoring voltage. With overvoltage and undervoltage monitoring functions.

Lithium-ion batteries differ from lead-acid batteries in that they require a Battery Management Systems (BMS) for high-accuracy monitoring of battery voltage, charge-discharge current, temperature, etc. To prevent battery depletion, a reduction in standby current is indispensable.

The DC/DC converter uses low on-resistance Si IGBTs or SiC MOSFETs to reduce conversion loss. The on-resistance has the characteristic to drop as the gate voltage rises so it is recommended to design a gate drive circuit using, for example, an Si IGBT with a high voltage of around 15V or an SiC MOSFET with a high voltage of around 18V.

LDO Regulator：

S-19213/4——For use in SiC MOSFET or Si IGBT gate driver circuits. The output voltage can be adjusted between 1.8 to 30V using an external resistor.

S-19212——For use in Si IGBT gate driver circuits. The output voltage can be set between 2.5 to 16V.

Voltage detector：

S-19115——Provides overvoltage monitoring. Built-in SENSE Pin reverse connection protection circuit. Current consumption of 0.6μA.

Watchdog Timer：

S-1951x——With reset and LDO regulator functions. Current consumption of 3.0μA.

Operational amplifier：

S-19630A——High-accuracy current detection. 36V operation, Rail-to-Rail input/output, low offset voltage of 50μV.