Home > Product Center > Products > Semiconductor device
IC | 
Optical

 iC-LA Data sheet.pdf

iC-LA

64x1 Linear Image Sensor with Bidirectional Shift and Extendable Data I/O

Features

  • 64 photo pixels of 183 μm x 200 μm at a pitch of 200 μm (127 DPI)

  • Integrating L-V conversion with low image lag and track-and-hold feature

  • Integration time can be set externally

  • Internal bidirectional shift register also permits reversed pixel data output

  • Extendible data I/O enables multiple sensor operation for chain circuits

  • On-chip temperature sensor data available with serial pixel output

  • Error signal output with overtemperature, undervoltage and overcurrent

  • All current LD types can be used (N/P/M configurations)

  • Blue laser diodes supported


Applications

  • Optical linear sensors

  • CCD substitute


 iC-LF1401 Data sheet.pdf

iC-LF1401

128x1 Linear Image Sensor with Electronic Shutter Function

Features

  • 128 active photo pixels of 56 μm at a pitch of 63.5 μm (400 DPI)

  • Integrating L-V conversion followed by a sample-and-hold circuit

  • High sensitivity and uniformity over wavelength

  • High clockrates of up to 5 MHz

  • Shutter function enables flexible integration times

  • Push-pull output amplifier

  • Pin-to-pin compatible with TSL1401 at higher speed and sensitivity



Applications

  • Optical linear sensors

  • CCD substitute


 LFH.pdf

iC-LFH

High Resolution CMOS Linear Image Sensors - (new)

Features

  • 1024 / 960 / 640 / 320 active photo pixels with 12.7 μm x 600 μm (2000 DPI)

  • Pin-selectable resolution of 2000, 1000, 500 and 250 DPI (binning or averaging selectable)

  • High sensitivity and uniformity over wavelength

  • High pixel clock rate of up to 5 MHz

  • Continuous sample and read mode

  • Asynchronous, global shutter enables flexible integration times

  • 3 V capable analog output with separate supply pin

  • Glitch-free push-pull analog output



Applications

  • Triangulation sensors

  • Contact image sensors

  • Spectroscopy sensors

  • CCD replacement


 iC-LF1402 Data sheet.pdf

iC-LFL1402

256x1 Gap-Free Linear Image Sensor with Electronic Shutter Function

Features

  • 256 active photo pixels of 56 μm at a gap-free pitch of 63.5 μm (400 DPI)

  • Integrating L-V conversion followed by a sample-and-hold circuit

  • High sensitivity and uniformity over wavelength

  • High clockrates of up to 5 MHz

  • Only 256 clocks required for readout

  • Shutter function enables flexible integration times

  • Push-pull output amplifier

  • Function equivalent to TSL1402 (serial mode)


Applications

  • Optical linear sensors

  • CCD substitute


 iC-LFM Data sheet.pdf

iC-LFM

64x1 Linear Image Sensor with Electronic Shutter Function

Features

  • 64 active photo pixels of 56 μm at a pitch of 63.5 μm (400 DPI)

  • Integrating L-V conversion followed by a sample-and-hold circuit

  • High sensitivity and uniformity over wavelength

  • High clockrates of up to 5 MHz

  • Only 64 clocks required for readout

  • Shutter function enables flexible integration times

  • Push-pull output amplifier


Applications

  • Optical linear sensors

  • CCD substitute



 iC-LFS Data sheet.pdf

iC-LFS

32x1 Linear Image Sensor with Electronic Shutter Function

Features

  • 32 active photo pixels of 56 μm at a pitch of 63.5 μm (400 DPI)

  • Integrating L-V conversion followed by a sample-and-hold circuit

  • High sensitivity and uniformity over wavelength

  • High clockrates of up to 5 MHz

  • Only 32 clocks required for readout

  • Shutter function enables flexible integration times

  • Push-pull output amplifier


Applications

  • Optical linear sensors

  • CCD substitute


 iC-LO Data sheet.pdf

iC-LO

Smart Triangulation Sensor IC

Features

  • Specially formed line image sensor comprising 129 elements

  • High ambient light suppression of up to 100 kLux with filter glass

  • Dynamic range of 100 dB

  • 2 antivalent switching outputs

  • Alarm message output

  • High switching frequencies

  • Low latency

  • Current or light-power control (ACC or APC) selectable per channel

  • Dual A/D converter for analog levels monitoring

  • Serial programming interface (SPI or I2C compliant)

  • Laser channel disable with programmable overcurrent threshold

  • Low drop linear regulator for 3.3 V

  • Optimized for N-type laser diodes


Applications

  • Diffuse reflective photoelectric sensors


 iC-LQNP Datasheet.pdf

iC-LQNP

Pulse and AC Light Sensor with Complementary Outputs

Features

  • Fast response amplifier with on-chip photodiode

  • High interference immunity due to monolithic design

  • Active photodiode area of ca. 1 mm2

  • Suitable for visible light and near infrared

  • Integrated band-pass filter with 140 kHz center frequency

  • High LF and DC (ambient) light suppression

  • Complementary analogue current source/sink outputs, transimpedance can be set by external resistor

  • Single 5 to 12 V supply, low power consumption also with bright ambient light


Applications

  • Amplification of pulse and AC light signals

  • Receiver for through beam and reflection light barriers with background suppression (sunlight) e.g. for presence detection in power operated gates, doors and windows etc.


 iC-OC Data sheet.pdf

iC-OC

Dual Integrating Opto Sensor with Shift Register for Chain Connection

Features

  • Two photosensors with integrating amplifiers

  • Integration time can be set externally

  • Internal shift register for chain connection

  • Detection of low supply voltage

  • Photosensors with 1 mm pitch, active area ca. 0.97 mm x 0.47 mm


Applications

  • Optical line sensors

  • CCD substitute


 iC-OD Data sheet.pdf

iC-OD, iC-ODL

Optical Position-Sensitive Detector (PSD) with Ambient Light Suppression

Features

  • Low-noise current amplifier with an integrated position-sensitive photodiode

  • Effective photodiode area 2.6 mm × 0.88 mm (iC-OD), longer version with 8.4 mm × 0.88 mm available (iC-ODL)

  • High sensitivity for visible light and near infrared

  • Integrated bandpass filter with 100 kHz center frequency

  • High background light suppression

  • Analogue output as current source

  • Low power consumption from 3.9 to 13.2 V supply voltage


Applications

  • Position-sensitive detection of pulse lights

  • Receiver for motion or proximity sensors


 iC-VP Data sheet.pdf

iC-VP

Photoswitch with Adjustable Sensitivity

Features

  • High spectral sensitivity

  • Sensitive to visible light and near infrared

  • Adjustable threshold

  • Short switching time

  • Supply voltage of 4.5 to 16 V

  • Photosensor size: 400 μm × 400 μm


Applications

  • Receiver for reflecting and nonreflecting light barriers

  • Multichip modules for absolute encoders


Magnetic

 iC-MZ Datasheet.pdf

iC-MZ

Differential Hall Switch and Gear-Tooth Sensor with Line Driver

Features

  • Dual Hall sensors set 2.0 mm apart

  • Magnetic field frequency range from DC to 40 kHz

  • Supply voltage range 4.5 to 36 V

  • Complementary push-pull line driver outputs with integrated line adaptation

  • Output stages are current limited and short-circuit-proof due to temperature shutdown

  • Min. 200 mA output current at 24 V supply voltage

  • Low driver stage saturation voltage (< 0.4 V at 30 mA)

  • RS422-compatible (TIA / EIA standard)

  • Temperature and supply voltage monitor with error messaging


Applications

  • Gear wheel sensing

  • Pole wheel and magnetic tape scanning

  • Magnetic incremental encoders

  • Proximity switches

  • Two-channel line drivers up to 100 kHz


 iC-SM2L Data sheet.pdf

iC-SM2L

AMR Linear Position Sensor (Pitch: 2 mm)

Features

  • Magneto resistive position sensor based on the AMR effect

  • Strong field sensor for 2 mm N/S pole pitch

  • One sine/cosine cycle per pole width (averaged using a pair of N/S poles)

  • High interpolation due to a sine signal with few harmonics

  • Low saturation field strength

  • High amplitude consistency with changes in distance

  • Resistant to strong magnetic fields

  • Not sensitive to external homogeneous magnetic fields



Applications

  • Linear position sensing

  • Length measuring systems


 iC-SM2L Data sheet.pdf

iC-SM5L

AMR Linear Position Sensor (Pitch: 5mm)

Features

  • Magneto resistive position sensor based on the AMR effect

  • Strong field sensor for 5 mm N/S pole pitch

  • One sine/cosine cycle per pole width (averaged using a pair of N/S poles)

  • High interpolation due to a sine signal with few harmonics

  • Low saturation field strength

  • High amplitude consistency with changes in distance

  • Resistant to strong magnetic fields

  • Not sensitive to external homogeneous magnetic fields


Applications

  • Linear position sensing

  • Length measuring systems