| w | EN
Home > Product Center > Products > Passive devices
 | Optical Communication Devices

 kpdeh16c_spec.pdf

KPDEH16C

Features

Surface illuminated type

Ultra high speed

Low dark current

 

Applications

100GbE/40GbE(IEEE802.3ba)

100Gbps long haul

Digital coherent receivers


 kpdeh16dc_spec.pdf

KPDEH16DC

Features

Surface illuminated type

Ultra high speed

Low dark current

Dual photodiode


Applications

100GbE/40GbE(IEEE802.3ba)

100Gbps long haul(OIF)

Digital coherent receivers


KPDEH16DLC

Features

Back surface illuminated type

Large alignment tolerance

Ultra high speed


Applications

100GHz Digital Coherent System

100GbE/40GbE(IEEE802.3ba)

 


KPDE10GC-V2

Features

Surface illuminated type

Low dark current

Low cost

 

Applications

Digital and analog optical communication

Optical LAN

OTDR

 


KPDE10GC-V3

Features

Back surface illuminated type

Large active area (45m)

Low dark current

Chip-on-carrier type is available

 

Applications

Digital and analog optical communication

Optical LAN

OTDR


 kpde004_spec.pdf

KPDE004

Features

Low capacitance and high speed with a PIN structure

Low dark current

High reliability

Pigtail type is available as an option

 

Applications

Digital and analog optical communication

Optical LAN

OTDR


 kpde006_spec.pdf

KPDE006

Features

Low capacitance and high speed with a PIN structure

Low dark current

Low voltage operation

High reliability

Pigtail type is available as an option

 

Applications

Digital and analog optical communication

Optical LAN

OTDR


 kpde008_spec.pdf

KPDE008

Features

Low capacitance and high speed with a PIN structure

Low dark current

Low voltage operation

High reliability

Pigtail type is available as an option

 

Applications

Digital and analog optical communication

Optical LAN

OTDR


 kpde020_spec.pdf

KPDE020

Features

Low dark current

High reliability

Pigtail type is available as an option


Applications

Digital and analog optical communication

Optical LAN

OTDR

 


 kpde030_spec.pdf

KPDE030

Features

Large active diameter (300m) for easy optical coupling

Low dark current

Wide spectral sensitivity to cover 1310nm, 
C-Band and L-Band with uniform responsivity

High reliability

Pigtail type is available as an option


Applications

Near infrared sensors

Laser diode and LED power monitor

Near infrared spectroscopy

Optical measurements and sensing


 kpde086s_spec.pdf

KPDE086S

Features

Large sensitive area of 1-mm-square

Low dark current

Low voltage operation


Applications

Near infrared sensors

Laser diode and LED power monitor

Near infrared spectroscopy

Power meters

 


 kpde150_spec.pdf

KPDE150

Features

Large active diameter of 1.5mm for KPDE150

Low voltage operation

Custom designed large area photodiodes are also available


Applications

Laser power monitor

Laser diode and LED aging equipment

Near infrared sensing system

Power meters

 


 kpde008_s_spec.pdf

KPDE008-S

Features

Low capacitance and high speed with a PIN structure

Low dark current

High reliability

Pigtail type is available as an option


Applications

Digital and analog optical communication

Optical LAN

OTDR


 kpde020_s_spec.pdf

KPDE020-S

Features

Low capacitance and high speed with a PIN structure

Low dark current

High reliability

Pigtail type is available as an option


Applications

Digital and analog optical communication

Optical LAN

OTDR

 


 kpde030_s_spec.pdf

KPDE030-S

Features

Low capacitance and high speed with a PIN structure

Low dark current

High reliability

Pigtail type is available as an option

 

Applications

Digital and analog optical communication

Optical LAN

OTDR


 kpde008s_tu_spec.pdf

KPDE008S-TU

Features

High density packaging of multiple photodiode channels

Low capacitance and high speed with a PIN structure

Low dark current

High reliability


Applications

Optical power monitor for WDM

DWDM system

Digital optical communication


 kpde030sa_tu_spec.pdf

KPDE030SA-TU

Features

High density packaging of multiple photodiode channels

Low capacitance and high speed with a PIN structure

Low dark current

High reliability


Applications

Optical power monitor for WDM

DWDM system

Digital optical communication


 kpde030sl_spec.pdf

KPDE030SL

Features

Large active area convenient for optical coupling

Wide spectral sensitivity to cover O-, E-, S-, C- and L-Bands with uniform responsivity

Wide dynamic range

Low dark current

Low PDL(Polarization dependent loss

High reliability


Applications

DWDM monitoring and control

Laser diode and LED power monitor

Power meters

Optical measurements and sensing


 kpdm024mt_spec.pdf

KPDM024MT

Features

Optical monitor for 24 channels

Hermetic sealing

Compact design package

Ribbon fiber with a lens array

Adjacent Crosstalk <-45db

Total Crosstalk <-40db

Low dark current

 

Application

WDM optical power monitor

Optical interconnection


 kpeimc_100_spec.pdf

KPEIMC-100

Features

Edge illuminated type photodiode for surface mount integration

Low dark current


Applications

Back light monitor of laser power

FTTH digital optical communication

Optical interconnection


 kpeimc_udcom_spec.pdf

KPEIMC-UDCOM

Features

Edge illuminated type for surface hybrid integration

Wide photodetecing area (100 x 120 m)

Low dark current


Applications

Back light monitor of laser power

Optical interconnection

FTTH digital optical communication


 kpde005ha1_spec.pdf

KPDE005HA1

Features

Surface illuminated type

Large active diameter (50m)

Low dark current


Applications

Optical interconnection

10G Ethernet/Fibre channel


 kpde005ha2_spec.pdf

KPDE005HA2

Features

Surface illuminated type

Large active diameter (50m)

Low dark current


Applications

Optical interconnection

10G Ethernet/Fibre channel

 


 kpde005ha4_spec.pdf

KPDE005HA4

Features

Surface illuminated type

Large active diameter (50m)

Low dark current


Applications

Optical interconnection

10G Ethernet/Fibre channel


 kpde005ha8_spec.pdf

KPDE005HA8

Features

Surface illuminated type

Large active diameter (50m)

Low dark current


Applications

Optical interconnection

10G Ethernet/Fibre channel


 kpde005ha12_spec.pdf

KPDE005HA12

Features

Surface illuminated type

Large active diameter (50m)

Low dark current


Applications

Optical interconnection

10G Ethernet/Fibre channel

 


 kpa8_2n_spec.pdf

KPA8-2N

Features

Large active diameter (300m) for easy optical coupling

Low dark current

Wide spectral sensitivity to cover 1310nm, 
C-Band and L-Band with uniform responsivity


Applications

Laser diode and LED power monitor

Near infrared sensors

Power meters

Optical measurements and sensing


 kpa4_2n_spec.pdf

KPA4-2N

Features

Large active diameter (300m) for easy optical coupling

Low dark current

Wide spectral sensitivity to cover 1310nm,
C-Band and L-Band with uniform responsivity


Applications

Laser diode and LED power monitor

Near infrared sensors

Power meters

Optical measurements and sensing

 


 kpdx150mb_spec.pdf

KPDX150MB

Features

High optical sensitivity (-39dBm)

Low noise and high speed trabs-impedence amplifier built-un to meet OC-3

Transmission speed 156Mbps (OC-3 compliant)

AGC circuit

5 pin package available for a photodiode current monitor

Pigtail/ROSA package also available as an option


Applications

Optical communication

Optical LAN

OE converters


 kpdx600m_spec.pdf

KPDX600M

Features

High optical sensitivity (-31dBm)

Low noise and high speed trabs-impedence amplifier built-un to meet OC-12

Transmission speed 622Mbps (OC-12 compliant)

AGC circuit

5 pin package available for a photodiode current monitor

Pig tail type /ROSA package also available as an option


Applications

Optical communication

Optical LAN

OE converters

 


 kpdx1gk_dimension.png

KPDX1GK

Features

High optical sensitivity (-32dBm )

Low noise and high speed trabs-impedence amplifier built-un to meet OC-24

AGC circuit built-in

5 pin package available for a photodiode current monitor

Pig tail type /ROSA package also available as an option

 

Applications

Optical communication

Optical LAN

OE converters

 

Description

A high speed InGaAs PIN photodiode is integrated with a transimpedance preamplifier and bypass chip capacitors, and is encapsulated in a small TO-46 package. A ball lens cap with AR coating is hermetically sealed to provide an efficient coupling with a single mode fiber. The pigtail type and the LC-ROSA type are available as an option.


 kpdx2gk_spec.pdf

KPDX2GK

Features

High optical sensitivity (-29dBm)

Low noise and high speed trans-impedance amplifier built-in to meet OC-48

Products available for OC-48, 2.5Gb/s

AGC circuit built-in

5 pin package available for a photodiode current monitor

Pig tail type /ROSA package also available as an option


Applications

Optical communication

Optical LAN

OE converters


 kpdx2ge_spec.pdf

KPDX2GE

Features

A long work distance is available between the can package and the fiber end for integrating optical design

5 pin package available for a photodiode current monitor

Low noise and high speed trans-impedance amplifier built-in to meet OC-48


Applications

Bi-directional CWDM optical communication by three-waves

Spectroscopy

Wavelenght selevtive sensors


 kpdx4g_spec.pdf

KPDX4G

Features

Low noise and high speed trabs-impedence amplifier built-un to meet OC-48

Low operating voltage of 3.3V

High reliability

5 pin package available for a photodiode current monitor

Pig tail type also available as an option


Applications

Metro-Access

Optical Ethernet, Optical LAN

1x/2x/4xFibre channel receiver


 kpdx10g_spec.pdf

KPDX10G

Features

Low noise and high speed trabs-impedence amplifier built-un to meet OC-192

High reliability

Wide operating temperature range(-40 to 85C)

With the differential output terminal

Pig tail type also available as an option


Applications

Optical communication

Optical LAN

OE converters


 kpdxa10g_xmd_spec.pdf

KPDX10G-XMD

Features

Low noise and high speed trabs-impedence amplifier built-un to meet OC-192

High reliability

Wide operating temperature range(-40 to +85C)

With the differential output terminals (50 on one side)

XMD-compliant


Applications

Optical communication

Optical LAN

OE converters


 kpdea005_56f_spec.pdf

KPDEA005-56F

Features

High speed (Up to 2.5Gbps)

Low dark current

High sensitivity


Applications

SONET

G-PON,GE-PON


 kpdea007_56f_spec.pdf

KPDEA007-56F

Features

High speed (Up to 1.25Gbps)

Low dark current

High sensitivity


Applications

SONET

GE-PON


KPGX1GK

Features

Low noise and high speed trabs-impedence amplifier built-un

High reliability

5 pin package available for a photodiode current monitor

Pigtail type / ROSA are available as an option

 

Applications

High speed data communications

1x/2x/4x Fibre channel receiver

Gigabit ethernet

850nm optical datalinks


KPGX2GK

Features

Low noise and high speed trabs-impedence amplifier built-un

High reliability

5 pin package available for a photodiode current monitor

Pigtail type / ROSA are available as an option

 

Applications

High speed data communications

1x/2x/4x Fibre channel receiver

Gigabit ethernet

850nm optical datalinks


 kpdxa1gk_spec.pdf

KPDXA1GK

Features

High optical sensitivity (-38dBm)

With the differential output terminals (50 on one side)

5 pin package available for APD photodiode current monitor

Pigtail type and LC-ROSA are available as an option


Applications

Laser Imaging Detection and Ranging LIDAR)

Measurenet of very weak light

Spectroscopy, fluorescence, and Mmedical Analysis


 kpdxa2gk_spec.pdf

KPDXA2GK

Features

High optical sensitivity (-38dBm)

With the differential output terminals (50 on one side)

5 pin package available for APD photodiode current monitor

Pigtail type and LC-ROSA are available as an option


Applications

Laser Imaging Detection and Ranging LIDAR)

Measurenet of very weak light


 kpdxa10g_spec.pdf

KPDXA10G

Features

High optical sensitivity (-28dBm )

Low noise and high speed trabs-impedence amplifier built-un to meet OC-192

Transmission speed 10Gb/s (OC-192 compliant)

5 pin package available for APD photodiode current monitor

Pig tail type /ROSA package also available as an option

Applications

Optical communication

Optical LAN

OE converters


 kpdxa10g_xmd_spec.pdf

KPDXA10G-XMD

Features

High optical sensitivity (-28dBm)

Low noise and high speed trabs-impedence amplifier built-un to meet OC-192

Transmission speed 10Gb/s (OC-192 compliant )

XMD compliant


Applications

Optical communication

Optical LAN

OE converters


 kpdg008_spec.pdf

KPDG008

Features

Low capacitance and high speed with a PIN structure

Low dark current

High reliability

Pig tail type also available as an option


Applications

Digital and analog optical VSR communication

Optical LAN

OE converters

 


 kpdg020c_spec.pdf

KPDG020C

Features

Large active diameter 200mգ

Low dark current

ȣ spedd response


Applications

Optical interconnection


 kpgx1gk_spec.pdf

KPGX1GK

Features

Low noise and high speed trabs-impedence amplifier built-un

High reliability

5 pin package available for a photodiode current monitor

Pigtail type / ROSA are available as an option


Applications

High speed data communications

1x/2x/4x Fibre channel receiver

Gigabit ethernet

850nm optical datalinks





 kpgx2gk_spec.pdf

KPGX2GK

Features

Low noise and high speed trabs-impedence amplifier built-un

High reliability

5 pin package available for a photodiode current monitor

Pigtail type / ROSA are available as an option


Applications

High speed data communications

1x/2x/4x Fibre channel receiver

Gigabit ethernet

850nm optical datalinks



 kpgx4g_spec.pdf

KPGX4G

Features

Low noise and high speed trabs-impedence amplifier built-un

High reliability

5 pin package available for a photodiode current monitor

Pigtail type / ROSA are available as an option


Applications

High speed data communications

1x/2x/4x Fibre channel receiver

Gigabit ethernet

850nm optical datalinks

 


 kpgx2gk_lr33s_spec.pdf

KPGX2GK-LR33S

Features

Low noise and high speed trabs-impedence amplifier built-un

High reliability

5 pin package available for a photodiode current monitor


Applications

High speed data communications

1x/2x/4x Fibre channel receiver

Gigabit ethernet

850nm optical datalinks


 

 


 kpgx4g_lr33s_spec.pdf

KPGX4G-LR33S

Features

Low noise and high speed trabs-impedence amplifier built-un

High reliability

5 pin package available for a photodiode current monitor


Applications

High speed data communications

1x/2x/4x Fibre channel receiver

Gigabit ethernet

850nm optical datalinks


 kpid020d_spec.pdf

KPID020D

Features

2GHz response with 200m active diameter

0.4GHz response with 500m active diameter

Low dark current ( Typ.10pA @ VR=3V )

Low voltage operation

Various package options are also available

Applications

Short wavelength optical communication

Optical measurement

Optical sensors

 


 kpid050m_spec.pdf

KPID050M

Features

2GHz response with 200m active diameter

0.4GHz response with 500m active diameter

Low dark current ( Typ.10pA @ VR=3V )

Low voltage operation

Various package options are also available

Applications

Short wavelength optical communication

Optical measurement

Optical sensors


KPID020DS-S

Features

High density packaging of multiple photodiode channels

Cap isolated 2-pin mini can (1.96mm dia.)

Small size (Cap size: 1.96mm dia. x 3.35mmL)

Low dark current (Typ. 15pA  VR=10V)

Wide spectral sensitivity (400-1000nm)


Applications

Digital and analog optical VSR communication

Optical LAN

OE converters


 


 kpid150hc_spec.pdf

KPID150HC

Features

Large active diameter 1500mգ

High speed response (Typ.0.2GHz @ VR=10V)

High responsibility (0.58A/W @ 10V, =650nm)


Applications

Optical fiber communication

High speed optical measurement

Optical sensors


KLD085VC

Features

VCSEL (Vertical Cavity Surface Emitting Laser Diode)

Bandwidth: 4GHz

 

Applications

Short range optical communication

High-data-rate transmission


KLD085VC-S

Features

VCSEL (Vertical Cavity Surface Emitting Laser Diode)

Cap isolated 2-pin mini can (1.96mm dia.)

Output power: 2.5mW

Bandwidth: 4GHz

 

Applications

Short range high-data-rate

transmission systems


KLD085VC-LTH32

Features

VCSELVertical Cavity Surface Emitting Laser Diode)

LC-TOSA type is provided

Output power: 1mW

Bandwidth: 4GHz

Monitoring photodiode is built in

 

Applications

Short range high-data-rate transmission systems